Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Artboard 1Asset 1Artboard 1Artboard 1Artboard 1

Service Contract As Standard

Award Winning Customer Service

Demonstrations Available

Semi Automatic Sleeve Sealer

Semi Automatic Sleeve Sealer

Key Features

  • Heavy duty sealing jaw for consistently strong seals.
  • Height adjustable sealing jaw for improved speeds and efficiency allowing easy upgrade path if required.
  • Independent tunnel conveyor drive.
  • Powered film feeds for speed and reliability.
  • Pack clamp as standard which is vital for unstable packs.

We would recommend a semi automatic sleeve sealer and shrink tunnel when your shrink wrapping requirements are low production, slow speed or using trayless or unstable products where flexibility is key.

Having the heat sealer separate to the shrink tunnel is far better than a ‘mono block’ design where the sealing machine and shrink tunnel are joined together for a number of reasons, not least being easier to move.

Most mono-block systems are designed to save space and reduce the build cost, which in itself can of course be a good thing. However this saving usually compromises on performance as the shrink tunnel conveyor belt is situated very close to the sealing jaw, meaning that as the shrink film is sealed around the pack, the shrink tunnel belt has to stop to ensure that the heatshrink pack is stationary during this process.

The problem with this is that the packs that have previously been shrink wrapped are inside the tunnel during the pause cycle. This means that the amount of time each shrink wrap pack is inside the shrink tunnel varies, depending upon what is being shrink wrapped through the heat sealer at the time, which will then lead to inconsistent results out of the shrink tunnel, with some packs under shrunk and some usually with burn holes in the plastic film.

Our system ensures the sleeve wrapper and shrink tunnel are entirely independent of each other so that each pack spends exactly the same amount of time inside the shrink tunnel, ensuring absolute consistency with the heat shrink sleeve pack.

Utilising a separate heat sealing machine and shrink tunnel also allows a very easy and cost effective upgrade path should volumes or production requirements change. In this case YPS will happily trade in the semi automatic sleeve sealer against a faster, automatic sleeve sealer in order to increase production with minimum disruption as the shrink tunnel would remain the same.

We design and manufacture a large proportion of our semi automatic shrink wrap machines in the UK and therefore can guarantee total reliability and backup/technical support.

Our specially profiled heavy duty Teflon coated sealing jaw gives very consistent, strong fin seals using polythene films. This type of shrink wrapping machine is easy to maintain and will provide many years of trouble free operation.

To complement each shrink wrap machine, we are also able to supply high quality polyolefin shrink plastic, polythene shrink film and even biodegradable plastic depending upon application type.

Service Contract As Standard

Award Winning Customer Service

Demonstrations Available

Transit Machines

Semi Automatic Sleeve Sealer Side feed automatic sleeve sealer Inline Automatic Sleeve Sealer Wide Inline Shrink Wrappers Side Sealers
Speed5-10ppm
Low
10-25ppm
Medium
10-25ppm
Medium
2-6ppm
Low
25ppm+ dependent on product size
FlexibilityVery flexible
Can handle random products
Flexible
but better if production is batched
Very flexible
Can handle random products
Very flexible
Can handle random products
Batched production, no change parts needed
Operator Skill LevelLow easy to operateReasonable
some setup is required
Low
easy to operate
Low
Easy to operate
High level. Set up is required.
InfeedNone - fed by handOptional but recommended
or fed from existing line
Optional but recommended
or fed from existing line
Usually required for loadingUsually required for loading.
Dimensions3000mm x 1600mm3566mm x 1187mm4000mm x 1000mmCustomcustom
Power32amps
three phase earth & neutral
32 amps
three phase earth & neutral
32 amps
three phase earth & neutral
CustomLow power.
Air6 bar6 bar6 barCustomNo air
Sizes500mm x 400mm500mm x 500mm
800mm x 600mm
600mm
800mm
1000mm
1000mm
1300mm
1600mm
2000mm
Up to 800mm wide, unlimited length

Enquire Today

01924 441355
Menu